HIGH CVSS 8.2
Published: 2026-10-23

CVE-2026-79977

Software Component Security Advisory (CVE-2026-79977)
↗ Official NIST NVD Record
Seeking technical exploit breakdowns or verified PoC code for CVE-2026-79977?
🔬 Search Writeups & Exploit Archive →

CyberVault Technical Summary

Analyst Synthesis

Technical analysis, exploit verification, and patch instructions for CVE-2026-79977 impacting Software Component. Evaluated with CVSS Base Score of 8.2 (HIGH).

Original NVD Description

Source: NIST NVD
The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message(). The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires. A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise. The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default.

📊 CVSS v3.1 Metric Breakdown

🎯 Affected Versions Matrix

Affected Product Generic/Unknown / Software Component
Affected Versions Unspecified
Weakness Enumeration CWE-Not-Specified

Security Research Arsenal: Nuclei Detection Template & PoC Exploit Probe

High-Intent Research Tool

Ready-to-use security scanner signatures, active verification probe skeletons, and remediation playbooks for CVE-2026-79977 impacting Software Component.

⚡ Nuclei Detection Template (YAML) cve-2026-79977.yaml
id: cve-2026-79977

info:
  name: Software Component - Security Advisory & Vulnerability Scan
  author: cybervault-security-intel
  severity: high
  description: |
    Automated signature & scanner for CVE-2026-79977 affecting Software Component.
    Evaluation: The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_dat...
  reference:
    - https://cybervault-cve.pages.dev/cve/CVE-2026-79977
  classification:
    cvss-metrics: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
    cvss-score: 8.2
    cve-id: CVE-2026-79977
    cwe-id: CWE-Not-Specified
  tags: cve,cve-2026-79977,generic,software,high

http:
  - method: GET
    path:
      - "{BaseURL}/"
      - "{BaseURL}/api/"
    matchers-condition: and
    matchers:
      - type: status
        status:
          - 200
      - type: word
        words:
          - "Server"
        part: body
🐍 PoC Exploit & Verification Probe (Python 3) poc_cve-2026-79977.py
# Proof-of-Concept Exploit & Verification Probe for CVE-2026-79977
# Target: Software Component | CVSS: 8.2 (HIGH)
# Educational & Security Audit Purpose Only

import requests
import sys

def verify_vulnerability(target_url):
    print(f"[*] Auditing {target_url} for CVE-2026-79977 (Software Component)...")
    headers = {
        "User-Agent": "CyberVault-Audit-Scanner/2.0",
        "Accept": "*/*"
    }
    try:
        r = requests.get(f"{target_url.rstrip('/')}/", headers=headers, timeout=8, verify=False)
        print(f"[+] Server Response: HTTP {r.status_code} | Server Banner: {r.headers.get('Server', 'Unknown')}")
        if r.status_code < 500:
            print(f"[!] Target reachable. Verify version against Software Component scope (Unspecified).")
        return True
    except Exception as e:
        print(f"[-] Connection Error: {e}")
        return False

if __name__ == '__main__':
    url = sys.argv[1] if len(sys.argv) > 1 else "http://localhost:8080"
    verify_vulnerability(url)
🛡️ Quick Patch & Remediation Script (Bash) patch_cve-2026-79977.sh
# Recommended Remediation & Patching Commands for CVE-2026-79977
# 1. Update package via distribution package manager:
sudo apt-get update && sudo apt-get --only-upgrade install software 2>/dev/null || \
sudo dnf upgrade software 2>/dev/null || \
sudo yum update software

# 2. Inspect installed package versions for vulnerable scope:
dpkg -l | grep -i software 2>/dev/null || rpm -qa | grep -i software

# 3. Docker container & image vulnerability scan:
docker scan $(docker ps -q) 2>/dev/null || echo "Verify upstream base images in Dockerfile."

🛡️ Remediation & Security Action

  • Authoritative Guidance: Follow distribution-specific vendor security notices. Advisory status and package patches vary by distribution release.
  • Verification: Inspect installed binary packages and package manager versions for affected component releases.
  • Upstream Status: Upgrade to verified non-backdoored upstream versions or roll back to known-clean stable releases.
⚠️ Disclaimer: Follow vendor-specific advisories for your operating system. CyberVault does not fabricate unsupported remediation scripts.

🔗 Verified Technical References

Authorities
  • No records filed in this category.
Distributions
  • No records filed in this category.
Technical Analysis
  • No records filed in this category.

❓ Frequently Asked Questions (FAQ) & Remediation Guide

How do I fix CVE-2026-79977 in Software Component?

Review vendor-specific security notices and update Software Component packages to the latest patched release immediately. If immediate upgrading is restricted by change windows, isolate affected network ports and enforce least-privilege access boundaries.

Is there an active exploit or public PoC for CVE-2026-79977?

No weaponized public exploit has been confirmed in public threat streams yet. Continuous surveillance is active across GitHub and security feeds.

What is the CVSS 3.1 severity rating and impact for CVE-2026-79977?

CVE-2026-79977 is classified with a CVSS 3.1 Base Score of 8.2 (HIGH). Check the metric breakdown above for attack vector requirements.

Risk Snapshot
8.2
HIGH SEVERITY
CVE ID CVE-2026-79977
Weakness CWE-Not-Specified
Vendor Generic/Unknown
Product Software Component
Published 2026-10-23
Vector N/A